Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Apply a 6 mm (0.24 in.) diameter dot of silicone gasket and sealer to the cylinder block, lower cylinder block and cylinder head mating surfaces.
4. NOTE: Fasteners 1, 3, 4, 8, 10, 11, 14, 15 and 16 are studs.
Position the cover and install the studs and bolts in the sequence shown.
5. Install the (CKP) sensor and connect the electrical connector.
6. Install the crankshaft front seal.
