Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Turn Signal Bulb: Service and Repair
SIDE LAMP/FRONT TURN SIGNAL LAMP BULB
REMOVAL
1. Remove the wheel and tire.
2. Position the inner fender well aside.
1
Remove the bolts.
2
Remove the pin-type retainers.
3
Remove the screw.
4
Position the inner fender well aside.
3. Remove the lamp socket from the lamp assembly.
4. Remove the bulb.
INSTALLATION
1. To install, reverse the removal procedure.