Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Drive Belt: Service and Repair
Water Pump Belt
With Tensioner
Water Pump Belt-3.0L (4V) with Tensioner
Removal and Installation
1. Remove the nuts and the engine appearance cover.
2. Rotate the drive belt tensioner clockwise and remove the water pump belt.
3. To install, reverse the removal procedure.
Without Tensioner
Water Pump Belt-3.0L (4V) without Tensioner
Removal
1. Remove the nuts and the engine appearance cover.
