Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
6. Remove the remote canister vent hose.
7. Remove the dust separator.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carry out a leak test. See: Powertrain Management/Emission Control Systems/Evaporative Emissions System/Testing and
Inspection/Component Tests and General Diagnostics/Component Tests/Evaporative Emission System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Powertrain Management/Emission Control Systems/Evaporative
Emissions System/Testing and Inspection/Component Tests and General Diagnostics/Component Tests/Evaporative Emission Repair
Verification Drive Cycle
NOTE: Lubricate all O-ring seals with MERPOL (R) O-Ring Seal Lubricant meeting Ford specification ESE-M99B144-B or equivalent.