Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
6. Remove the remote canister vent hose, dust separator and canister vent solenoid.
7. Remove the EVAP canister outlet tube.
8. Remove the EVAP canister.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carry out a leak test. See: Testing and Inspection/Component Tests and General Diagnostics/Component Tests/Evaporative Emission System
Leak Test
^
Carry out the evaporative emission repair verification drive cycle. See: Testing and Inspection/Component Tests and General
Diagnostics/Component Tests/Evaporative Emission Repair Verification Drive Cycle
NOTE: Lubricate all O-ring seals with MERPOL (R) O-Ring Seal Lubricant meeting Ford specification ESE-M99B144-B or equivalent.
