Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
EGR Electronic Vacuum Regulator Solenoid: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Disconnect the EGR vacuum regulator valve.
^
Disconnect the electrical connector.
^
Disconnect the vacuum hoses.
3. Remove the PCM wiring harness bracket.
^
Remove the nut.
^
Position the bracket aside.
4. Remove the bolts and remove the EGR vacuum regulator valve.
INSTALLATION
1. To install, reverse the removal procedure.