Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Accelerator Pedal: Service and Repair
Accelerator Pedal and Shaft
REMOVAL
1. Disconnect the crankcase ventilation hose.
2. Remove the bolt, the nuts and the engine appearance cover.
3. Disconnect the accelerator cable from the throttle lever.
1
Rotate the throttle lever.
2
Slide the accelerator cable end out of the throttle lever.
4. Remove the accelerator pedal and shaft assembly.
1
Disconnect the accelerator cable.