Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Ignition Coil: Service and Repair
Coil-On-Plug - LH
REMOVAL
1. Remove the nuts and the engine appearance cover.
2. Remove the ignition coil-on-plug.
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Remove the coil-on-plug.
INSTALLATION
1. To install, reverse the removal procedure.
^
Apply a light film of silicone brake caliper grease and dielectric compound to the interior of the spark plug boot prior to installation.