Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
2. Position and align the two passenger air bag module trim cover alignment pins (one shown) to the instrument panel openings.
3. Install the passenger air bag module trim cover into the instrument panel.
^
Install the trim cover alignment pins into the instrument panel.
^
When aligned correctly, the passenger air bag module trim cover will have an even gap around its perimeter and sit flat up against the
instrument panel.
4. Install the bolts.
5. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
