Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
2. Tighten the right-hand side RCM bolts.
WARNING: THE TIGHTENING TORQUE OF THE RESTRAINTS CONTROL MODULE (RCM) RETAINING BOLTS IS
CRITICAL FOR PROPER SYSTEM OPERATION.
3. Reposition the carpet back at the right-hand side of the center tunnel area under the instrument panel.
4. Connect the RCM.
1
Tighten the bolt.
2
Connect the RCM electrical connectors.
3
Slide and engage the RCM electrical connector locking clips.
WARNING: THE TIGHTENING TORQUE OF THE RESTRAINTS CONTROL MODULE (RCM) RETAINING BOLTS IS
CRITICAL FOR PROPER SYSTEM OPERATION.
5. Reposition the carpet back at the left-hand side of the center tunnel area under the instrument panel.
