Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Pressure Feedback Exhaust Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the differential pressure feedback EGR sensor.
1
Disconnect the electrical connector.
2
Carefully remove the differential pressure feedback EGR sensor by sliding up and off the EGR tube.
NOTE: The 3.0L (4V) engine is shown, the 2.0L Zetec engine is similar.
INSTALLATION
1. To install, reverse the removal procedure.
