Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
8. Disconnect the driver side air bag module electrical connector.
1
Slide and release the driver side air bag module electrical connector locking clip.
2
Disconnect the driver side air bag module electrical connector.
9. Attach the restraint system diagnostic toot to the driver side air bag module floor electrical connector.
10. Disconnect the driver safety belt buckle pretensioner electrical connector.
1
Remove the driver safety belt buckle pretensioner electrical connector from the under the seat bracket.
2
Push to release the driver safety belt buckle pretensioner electrical connector locking clip.
3
Disconnect the driver safety belt buckle pretensioner electrical connector.
11. Attach the restraint system diagnostic tool to the driver safety belt buckle pretensioner floor electrical connector.
