Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
14. Remove the lower shock absorber nut.
15. NOTE: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.
Disconnect the lower ball joint.
^
Remove the nut.
16. NOTE: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.
Disconnect the upper ball joint.
^
Remove the nut.
17. NOTE: Note the position of the spring insulator and spring for installation.
Remove the spring.
^
Lower the support to the wheel knuckle.
