Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
8. Disconnect the brake line from the wheel cylinder.
^
Remove the brake line bracket bolt.
9. Support the wheel knuckle.
10. Remove the lower shock absorber nut.
11. NOTE: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.
Disconnect the lower ball joint.
^
Remove the nut.
12. NOTE: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.
Disconnect the upper ball joint.
^
Remove the nut.
