Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
6. Remove the air cleaner assembly.
7. NOTE: It may be necessary to remove the thermostat housing to gain access to the Transmission Range (TR) sensor.
Remove the thermostat housing.
8. Remove the Transmission Range (TR) sensor.
1
Disconnect the TR sensor electrical connector.
2
Remove the bolts.
3
Remove the TR sensor.
Installation
1. NOTE: Make sure the transaxle is in the NEUTRAL position.
Install the Transmission Range (TR) sensor and loosely install the bolts.