Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Shifter M/T: Service and Repair
Gearshift Lever Boot
Gearshift Lever Boot
Removal and Installation
1. Remove the center console trim and gearshift lever boot.
1
Remove the gearshift lever knob.
2
Remove the center console trim and gearshift lever boot.
2. Remove the gearshift lever boot.
1
Remove the screws.
2
Remove the gearshift lever boot.
3. To install, reverse the removal procedure.
