Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
2. Using the special tool align the TR sensor and tighten the bolts.
^
Connect the electrical connector.
3. Install the thermostat housing.
4. Install the air cleaner assembly.
5. Install the intake tube and air cleaner cover.
6. Connect the breather tube and Mass Air Flow (MAF) sensor.
7. NOTE: Before installing the battery tray check the vent tube hose for any obstructions, kinks, or incorrect routing position.
Install the battery and tray.
8. NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its
adaptive strategy. The vehicle may need to be driven 160 km (100 miles) or more to relearn the strategy.
