Escape 4WD V6-3.0L (2008)
Trunk / Liftgate Switch: Service and Repair
Liftgate Release Switch - Liftgate Window
LIFTGATE RELEASE SWITCH - LIFTGATE WINDOW
Removal and Installation
1. Remove the liftgate trim panel.
2. Remove the 4 liftgate trim bezel nuts and remove the bezel from the liftgate.
-
To install, tighten to 8 Nm (71 lb-in).
-
Disconnect the liftgate window release switch electrical connector.
-
Using the appropriate tool, press the tabs and remove the liftgate window release switch.
3. To install, reverse the removal procedure.