ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel Gauge Sender|Description and Operation|Page 7397 > < Fuel Gauge Sender|Description and Operation|Page 7395
Page 4
background image

Removal and Installation

WARNING:

-

Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly
flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

-

Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any
fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result
in serious personal injury.

-

Before working on or disconnecting any of the fuel tubes or fuel system components, relieve the fuel system pressure to prevent accidental
spraying of fuel. Fuel in the fuel system remains under high pressure, even when the engine is not running. Failure to follow this
instruction may result in serious personal injury.

-

Remove the fuel filler cap slowly. The fuel system may be under pressure. If the fuel filler cap is venting vapor or if you hear a hissing

Fuel Gauge Sender|Description and Operation|Page 7397 > < Fuel Gauge Sender|Description and Operation|Page 7395