Escape 4WD V6-3.0L (2008)
Fluid - M/T: Service and Repair
Transaxle Draining and Filling
Material
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the drain plug and drain the fluid.
Manual Transaxle Drain Plug
3. NOTE: Use a new gasket and apply sealant on the drain plug.
Install the drain plug.
^
Tighten to 35 Nm (26 lb-ft).
Fill Level Inspection Plug
4. Remove the fill level inspection plug.
