2008 Escape 4WD V6-30L: Powertrain Management & Control Systems
Information Bus: Description and Operation
COMMUNICATIONS NETWORK
Vehicle communication utilizes both International Standards Organization (ISO) 9141 and controller area network (CAN) communications. ISO 9141 is
used for diagnostic use only while CAN allows many modules to communicate with each other on a common network. CAN in-vehicle networking is a
method for transferring data among distributed electronic modules via a serial data bus.
Without serial networking, intermodule communication requires dedicated, point to point wiring resulting in bulky, expensive, complex, and difficult to
install wiring harnesses. Applying a serial data network reduces the number of wires, combining the signals on a single network. Information is sent to
the individual control modules that control each function.
The vehicle has 3 module communication networks:
-
ISO 9141
-
Medium speed (MS) CAN
-
High speed (HS) CAN
All 3 networks are connected to the data link connector (DLC). This makes diagnosis and testing of these systems easier by allowing one scan tool to be
able to diagnose and control any module on the 3 networks from one connector. The DLC can be found under the instrument panel between the steering
column and the audio unit.
Network Topology (Part 1)
