Escape 4WD V6-3.0L (2008)
B4-B5
Test C: The Four Wheel Drive (4WD) Control Module Does Not Respond To The Scan Tool
PINPOINT TEST C: THE FOUR WHEEL DRIVE (4WD) CONTROL MODULE DOES NOT RESPOND TO THE SCAN TOOL
Normal Operation
The four wheel drive (4WD) control module communicates with the scan tool through the high speed controller area network (HS-CAN). Circuits
VDB04 (WH/BU) (HS-CAN +) and VDB05 (WH) (HS-CAN -) provide the network connection to the 4WD control module. The 4WD control
module shares the HS-CAN network with the PCM, the ABS module, the instrument cluster, the restraints control module (RCM), the power steering
control module and the occupant classification sensor module. Voltage for the 4WD control module is provided by circuits CBP35 (YE/GY) and
SBP11 (BU/RD). Ground is provided by circuit GD182 (BK/GY).
This pinpoint test is intended to diagnose the following:
-
Fuse
-
Wiring, terminals or connectors
-
4WD control module
