Escape 4WD V6-3.0L (2008)
Part 2
Removal and Installation
1. Carefully detach the differential pressure feedback EGR sensor from the EGR valve tube and position aside.
2. Disconnect the exhaust manifold-to-EGR valve tube fitting from the EGR valve.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Disconnect the exhaust manifold-to-EGR valve tube fitting from the RH catalytic convertor.
-
To install, tighten to 40 Nm (30 lb-ft).
4. Remove the EGR valve tube.
5. To install, reverse the removal procedure.
