Escape 4WD V6-3.0L (2008)
Accelerator Pedal: Technical Service Bulletins
Fuel System - Throttle Cable To Pedal Connector Kit
TSB 09-21-9
11/02/09
NEW SERVICE KIT AVAILABLE FOR ACCELERATOR
CABLE TO PEDAL CONNECTION
FORD:
2007-2008 Escape
MERCURY:
2007-2008 Mariner
ISSUE
Some 2007-2008 Escape and Mariner (excluding Hybrid) may require the accelerator cable to accelerator pedal connection repaired. A new service clip
has been released for use, in lieu of replacing the cable and/or pedal assemblies.
ACTION
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
1. Position clip on top part of pedal. (Figure 1)
2. Snap bottom of clip onto pedal by pushing forward. (Figure 2)
3. Check to make sure clip is completely snapped in place. Move accelerator pedal from idle to wide open throttle and check that surrounding
components do not come in contact with the pedal.
