Escape 4WD V6-3.0L (2008)
Intake Air Duct: Service and Repair
AIR CLEANER OUTLET PIPE
Exploded View
Removal and Installation
1. Disconnect the crankcase vent tube from the air cleaner outlet pipe.
2. Loosen the 2 clamps and remove the air cleaner outlet pipe.
-
To install, tighten to 4 Nm (35 lb-in).
3. NOTE: The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.
To install, reverse the removal procedure.
