Escape 4WD V6-3.0L (2008)
Transmission Position Switch/Sensor: Adjustments
Transmission Range (TR) Sensor Adjustment
Special Tool(s)
1. Remove the battery and tray.
2. NOTE: Make sure the transaxle is in the NEUTRAL position.
Loosen the transmission range (TR) sensor bolts.
3. Using the special tool, align the TR sensor and tighten the bolts.
^
Tighten to 11 Nm (8 lb-ft).
4. Install the battery and tray.
5. Check for correct operation. The engine should start only in PARK or NEUTRAL. The reverse lamps should illuminate in the REVERSE position.
