Escape 4WD V6-3.0L (2008)
2. Adjust the spark plug gap as necessary.
3. CAUTION: Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
Install the spark plugs.
-
Tighten to 15 Nm (11 lb-ft).
4. NOTE: Apply a small amount of dielectric grease to the inside of the ignition coil boots before attaching to the spark plugs.
Install the ignition coils and bolts.
-
Tighten to 7 Nm (62 lb-in).
