Escape 4WD V6-3.0L (2008)
Align the driver air bag module hooks to the steering wheel and, while pushing inward, seat the 3 driver air bag module hooks to the steering
wheel wire clip.
-
When the 3 driver air bag module hooks are seated in place, gently pull outward at the corners of the driver air bag module to make sure that
the 3 hooks are fully seated. There should also be an even gap between the driver air bag module trim cover and the steering wheel. Check the
driver air bag module and trim cover for correct movement when applying the horn.
3. Repower the SRS.
