Escape 4WD V6-3.0L (2008)
5. Install the driver side D-pillar trim panel.
1
Engage the D-pillar trim panel to the quarter trim panel.
2
Install the D-pillar trim panel.
3
Install the weatherstrip.
6. Connect the passenger side safety canopy module electrical connector.
7. Install the passenger side D-pillar trim panel.
1
Engage the D-pillar trim panel to the quarter trim panel.
2
Install the D-pillar trim panel.
3
Install the weatherstrip.
8. Connect the passenger seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking
