ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Campaign - A/T Fluid Cooler Inspection/Replacement|Page 3465 > < Campaign - A/T Fluid Cooler Inspection/Replacement|Page 3463
Page 6
background image

1. Using a suitable light, look through the radiator grille and inspect the transmission fluid cooler mounting bracket for a grommet behind the mounting

bolt. See Figure 1 and Figure 2.

2. If the grommet IS present NO further action is required and this procedure is complete See Figure 2.

ESCAPE

3. If the grommet is NOT present remove the radiator grille. See Figure 3.

^

Remove the two upper grille bolts

^

Slightly tip the grille outward and remove the two lower inside grille bolts

^

Slightly tip the grille outward and remove the two lower grille speed nuts that attach the grille to the front bumper cover

^

Release the three lower grille retainers from the front bumper cover

Campaign - A/T Fluid Cooler Inspection/Replacement|Page 3465 > < Campaign - A/T Fluid Cooler Inspection/Replacement|Page 3463