Escape 4WD V6-3.0L VIN 1 (2005)
Radiator: Service and Repair
Radiator-3.0L
Removal and Installation
1. With vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system.
3. Remove the cooling fan motor and shroud.
4. Disconnect the upper radiator-to-degas bottle hose from the radiator.
5. Disconnect the upper radiator hose from the radiator.
6. Disconnect the two transaxle cooling hoses from the radiator.
7. Disconnect the lower degas bottle-to-radiator hose from the radiator.
8. Disconnect the lower radiator hose from the radiator.
9. Remove the radiator.
10. To install, reverse the removal procedure.
11. Fill and bleed the cooling system.
