Escape 4WD V6-3.0L VIN 1 (2005)
Valve Cover: Service and Repair
Valve Cover LH
Valve Cover-LH
Material
Removal
CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning
gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
1. Remove the LH ignition coil-on-plugs.
2. CAUTION: Do not disconnect the crankcase ventilation tube from the valve cover or damage to the ventilation tube may occur.
Disconnect the crankcase ventilation tube from the air cleaner outlet pipe.
3. Remove the 2 nuts and the coolant pump belt shield.
4. Detach the 5 wiring retainers from the valve cover stud bolts.
