Escape 4WD V6-3.0L VIN 1 (2005)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube
Material
Oil Level Indicator and Tube
Removal and Installation
1. Detach the upper radiator hose pin-type retainer from the radiator core support and position the hose aside.
2. Remove the 4 upper radiator support bracket bolts and the 2 brackets.
^
To install, tighten to 10 Nm (89 inch lbs.).
3. Remove the oil level indicator.
4. Remove the stud bolt and then remove the oil level indicator tube by guiding it between the radiator core support and the cooling fan.
^
Remove and discard the O-ring seal.
^
To install, tighten to 10 Nm (89 inch lbs.).
5. NOTE: Install a new O-ring seal and lubricate with clean engine oil.
NOTE: Installation of the oil level indicator may require the assistance of a second technician to align the tube with the orifice.
To install, reverse the removal procedure.