Escape 4WD V6-3.0L VIN 1 (2005)
6. Rotate the front wheel spindle tie-rods to increase or decrease the front toe.
7. CAUTION: Hold the tie-rod end stationary with a wrench while tightening the nut, or damage to the boot can occur.
NOTE: Do not disturb the toe settings while tightening the nut(s).
Tighten the tie-rod end jam nut(s).
8. Install the steering gear bellows clamp(s).
9. Check the toe settings. Follow the equipment manufacturer's instructions.
Rear
Rear Toe Adjustment
1. CAUTION: The cam nut and cam bolt area must be free of debris to ensure proper clamping.
NOTE: Clean the general area of the joint to prevent debris from entering the joint. Clean the area using only mild liquids.
NOTE: Jounce the vehicle to make sure that the suspension is in its normal, at-rest position.
Check the toe setting using suitable wheel alignment equipment.
