Escape 4WD V6-3.0L VIN 1 (2005)
Canister Purge Control Valve: Service and Repair
EVAPORATIVE EMISSION CANISTER PURGE VALVE
Removal
WARNING:
-
The evaporative emission system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents
the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark
occurring, which can cause a fire or explosion if fuel vapor or liquefied fuel are present in the area. Failure to follow these instructions
can result in personal injury.
-
Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly flammable
mixtures are always present and may be ignited, resulting in possible personal injury.
1. Disconnect the battery ground cable.
2. Disconnect the evaporative emissions (EVAP) canister purge valve electrical connector.
3. CAUTION: When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the
