Escape 4WD V6-3.0L VIN 1 (2005)
6. Disconnect the safety canopy module electrical connector and detach the connector from the D-pillar.
7. Detach the safety canopy module wiring clip from the roof panel brace.
8. Remove the 2 safety canopy module bolts near the ignitor (between the C and D-pillars).
9. If the vehicle is equipped with a moonroof, disconnect the moonroof rear drain hose.
10. If the vehicle is equipped with a rear window wiper assembly, detach the hose clips and position the hose aside.
11. Remove the 2 bolts from the safety canopy module tether at the B-pillar.
12. Remove the remaining 2 safety canopy module bolts (1 near the top of the C-pillar, 1 between the B and C-pillars).
