Escape 4WD V6-3.0L VIN 1 (2005)
6. Pull and remove the manual lumbar knob.
All seats
7. Fully recline the seat backrest.
8. Release the seat back trim cover J-clip.
9. Move the seat backrest to the upright position.
10. WARNING: Front seat back trim covers installed on seats equipped with side air bags cannot be repaired; they are to be replaced
(cleaning is permissible).
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip. The hook and loop strip can be torn
from the seat cushion foam.
Place a hand between the seat backrest trim cover and foam pad and carefully separate the hook and loop strips.
11. Carefully roll up the seat back trim cover in an inside out fashion to the side air bag module.
12. Release the hook and loop retainer from around seat backrest frame.
