Escape 4WD V6-3.0L VIN 1 (2005)
2. Remove the bolt and the child safety seat tether anchor.
-
To install, tighten to 22 Nm (16 lb-ft).
3. WARNING: It is important that the bolt/anchor be securely tightened to specification. Otherwise, the child's safety seat may not be
properly secured, and the child can be injured in case of a sudden stop or accident.
NOTE:
-
Rework the sheet metal to its original condition and structural integrity.
-
Make sure to tighten the bolts to specification.
To install, reverse the removal procedure.
