Escape 4WD V6-3.0L VIN 1 (2005)
Rear Knuckle: Service and Repair
Wheel Knuckle
Special Tool(s)
Removal
NOTE: LH is shown, RH is similar.
Drum brake vehicles
1. Remove the brake shoes.
2. Disconnect the parking brake cable from the brake backing plate.
^
Remove the parking brake cable from the brake backing plate.
3. Disconnect the brake line from the wheel cylinder and remove the brake line bracket bolt.
Disc brake vehicles
4. Remove the parking brake shoes.
5. Remove and discard the wheel hub nut.
