Escape 4WD V6-3.0L VIN 1 (2005)
Drive/Propeller Shaft: Service and Repair
Removal and Installation
Driveshaft Removal and Installation
WARNING: The normal operating temperature of the exhaust system is very high. Never attempt to remove any part of the system until it
has cooled. Be especially careful when working around the catalytic converters. The temperature of the converter rises to a high level after
only a few minutes of engine operation. Failure to follow these instructions may result in personal injury.
CAUTION: Do not swap driveshaft assembles from different vehicles. The Escape Hybrid drive shaft is longer than the driveshaft in the