Escape 4WD V6-3.0L VIN 1 (2005)
3. Using the special tool, support the engine.
4. Remove the 4 LH transaxle support insulator bolts.
^
To install, tighten to 55 Nm (41 ft. lbs.).
5. Remove the through-bolt and the LH transaxle support insulator.
^
To install, tighten to 90 Nm (66 ft. lbs.).
6. Remove the 3 nuts and the LH transaxle support insulator bracket.
^
To install, tighten to 90 Nm (66 ft. lbs.).
7. To install, reverse the removal procedure.
