Escape AWD V6-3.0L VIN 1 (2004)
13. Tighten the front disc brake caliper bleeder screw.
14. Fill the brake master cylinder reservoir and install the reservoir cap.
^
Use High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification ESA-M6C25-A, DOT 3.
Gravity Bleed
Brake system
1. CAUTION: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
Fill the brake master cylinder reservoir with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification
ESA-M6C25-A, DOT 3.
2. Begin bleeding the system, going in order from the RH rear wheel, to the LH rear wheel, then to the RH front wheel and ending with the LH front
wheel.
Rear drum brakes
3. CAUTION: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
Loosen the rear wheel cylinder bleeder screw and leave open until clear, bubble-free brake fluid flows.
