Escape AWD V6-3.0L VIN 1 (2004)
7. Remove the wire harness pin-type retainer.
8. Remove the floor duct pin-type retainers and remove the duct.
Installation
1. To install, reverse the removal procedure.
DEFROSTER DUCT
Removal
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Removal and
Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Installation
2. Remove the screws and the retaining guides.
3. Remove the screws and remove the duct.
Installation
1. To install, reverse the removal procedure.
CENTER REGISTER DUCT
Removal
1. Remove the defroster duct.
