Escape AWD V6-3.0L VIN 1 (2004)
3. Hold the special tool T-handle stationary and rotate the special tool body to remove the A/C evaporator core orifice.
4. If the A/C evaporator core orifice is broken, screw the end of the special tool into the broken A/C evaporator core orifice.
5. Hold the special tool T-handle stationary and rotate the special tool body to remove the broken A/C evaporator core orifice.
INSTALLATION
1. Lubricate and install the O-ring seals on the A/C evaporator core orifice.
-
Use PAG Compressor Oil YN-12-C or equivalent meeting Ford specification WSH-M1C231-B.
2. Place the A/C evaporator core orifice into the special tool.
