Escape AWD V6-3.0L VIN 1 (2004)
Refrigerant: Service and Repair
Identifying Refrigerants
IDENTIFYING REFRIGERANTS
Refrigerant Identifier With Air-Radicator
SPECIAL TOOL(S)
1. NOTE: Prior to recovering or charging the refrigerant system, you must use an A/C refrigerant analyzer to identify gas samples taken directly
from the refrigeration system or storage containers.
Follow the instructions included with the refrigerant analyzer to obtain the sample for testing.
2. The analyzer will display one of the following:
-
A green "PASS" light emitting diode (LED) will light if the purity of the R-134, R-12 or the R-22 is better than 98% by weight.
-
A red "FAIL" LED will light if the purity of the gases does not meet the 98% purity standard.
-
A red "FAIL" LED and "HYDROCARBON" light will illuminate and a horn will sound if a hydrocarbon is detected above 5%. This will alert
the user of potential hazards.
3. If contaminated refrigerant is detected, DO NOT recover the refrigerant into your recovery/recycling equipment.