Escape AWD V6-3.0L VIN 1 (2004)
Transmission Position Switch/Sensor: Service and Repair
Special Tools And Equipment
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the battery and tray.
3. Remove the transmission range (TR) sensor.
1. Disconnect the TR sensor electrical connector.
2. Remove the bolts.
3. Remove the TR sensor.
Installation
1. NOTE: Make sure the transaxle is in the NEUTRAL position.
Install the transmission range (TR) sensor and loosely install the bolts.