Escape AWD V6-3.0L VIN 1 (2004)
Pressure Feedback Exhaust Sensor: Service and Repair
DIFFERENTIAL PRESSURE FEEDBACK EXHAUST GAS RECIRCULATION (EGR) SYSTEM
REMOVAL
1. Disconnect the battery ground cable.
2. NOTE: The 3.0L (4V) engine is shown, the 2.0L Zetec engine is similar.
Remove the differential pressure feedback EGR sensor.
1
Disconnect the electrical connector.
2
Carefully remove the differential pressure feedback EGR sensor by sliding up and off the EGR tube.
INSTALLATION
1. To install, reverse the removal procedure.
