Escape AWD V6-3.0L VIN 1 (2004)
Inertia Fuel Shutoff Switch: Service and Repair
INERTIA FUEL SHUTOFF (IFS) SWITCH
REMOVAL
1. Remove the cowl side trim panel.
1
Remove the pin-type retainers.
2
Remove the nut.
3
Remove the cowl side trim panel.
2. Remove the inertia fuel shutoff (IFS) switch.
1
Disconnect the connector.
2
Remove the screws and the IFS switch.
INSTALLATION
1. To install, reverse the removal procedure.
