Escape AWD V6-3.0L VIN 1 (2004)
Seat Belt Retractor: Service and Repair
Front Safety Belt Retractor
FRONT SAFETY BELT RETRACTOR
Seat Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
WARNING: All safety belt assemblies including retractors, buckles, front seat belt buckle support assemblies (slide bar), shoulder belt height
adjusters (if so equipped), child safety seat tether attachments, and attaching hardware should be inspected after any collision. All belt
assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate properly. Belt assemblies not in
use during a collision should also be inspected and replaced if either damage or improper operation is noted.
NOTE: The driver side is shown, the passenger side is similar.
1. Remove the B-pillar trim panel.
2. Remove the safety belt anchor.
1
Using the special tool, remove the bolt.
2
Remove the safety belt anchor.
3. Separate the front safety belt retractor from the B-pillar.
1
Remove the bolt.
2
Using the special tool, remove the bolt.
3
Separate the front safety belt retractor from the B-pillar.