Escape AWD V6-3.0L VIN 1 (2004)
Power Steering Line/Hose: Service and Repair
Steering Gear to Fluid Cooler Return Hose
Steering Gear to Fluid Cooler Return Hose
Removal and Installation
1. NOTE: Drain the excess power steering fluid into a suitable drain pan.
NOTE: Make sure not to drop the O-ring seals.
Disconnect the power steering pressure and return lines.
1
Remove the bolt.
2
Disconnect the power steering pressure and return lines.
2. Remove the power steering return line bracket-to-gear bolt.
3. Release the clamp and remove the power steering return line.
4. NOTE: Make sure the O-ring seals are on the power steering pressure and return lines.
To install, reverse the removal procedure.
^
Fill, bleed and leak check the power steering system.
